engine stem grinding machine is a universal grinding machine. It can grind round parts, we use it to grind stem of engine valve and groove.
Stem diameter :
|
|
Overall length :
|
|
Head diameter:
|
|
Centerless Grinding Machines
Centerless grinding machines is a powerful engine valve grinding machine. It can grind round parts. We use it to grind stem of engine valve and groove of engine valve. it is fully automatic and at high speed. help you save cost and improve efficiency.
Centerless Grinding Machines Advantages
1. Stronger grinding capacity, wheel speed: 60m/s Improve the cycle time and enhance the smoothness of face
2. Intelligency: Grinding wheel realizes constant speed operation, automatic compensation after dressing, automatic production
Grinding wheel
Grinding wheel spindle support is used five-piece liquid dynamic pressure bearings, rotary precision is good. Adapt AC inverter control motor to achieve automatic sub-variable speed, so as to achieve constant line speed. Max working speed: 45m/s.
Guide wheel
Guide wheel spindle support with an inner taper of 1:10 as a whole type of sliding bearings; rear support with pairs of double angular contact ball bearings for radial and axial positioning.
Dressing equipment
The grinding wheel and adjusting device are servo-driven, step-less speed change, smooth dressing, and the dressing seat adopts special alloy cast iron, and is composed of heat treatment, precision guideway, and ball screw to ensure that the dressing is flat and straight.
Oil pressure switch
Used for lubrication of bed feed system.
Micro-fine adjust handwheel
Feed per scale: 0.001mm
Processing parameter | ||||
Processing range | Stem Dia:φ5-φ10mm,Length:≤145mm Hardness:HRC25-58 | |||
Material | 21-4N、4Cr10Si2Mo、Import SUH:3、SUH:35 etc;Hardness: 25-45HRc | |||
Processing accuracy | Rough Grinding (mm) | Semi-finish Grinding (mm) | Finish grinding (mm) | |
Grinding allowance | 0.25-0.30 | 0.10-0.15 | 0.05-0.08 | |
Straightness | 0.012 | 0.008 | 0.003 | |
Roundness | 0.01 | 0.007 | 0.003 | |
Roughness | Ra1.2 | Ra0.8 | Ra0.032 | |
Size Tolerance | ±0.020 | ±0.010 | ±0.003 | |
Cycle time | About 10s/piece (Different diameter, the time is different ) |
Workpieces: Gear shaft; Cardan joint; Needles; Rod; Pipe; Rolling element |