Professional engine valve manufacturing machines supplier!

Tianzhijiao

+0086-512-66294696+86 181 3697 7277

How to handle the engine valve failure?

Views: 1791 Author: Site Editor Publish Time: Origin: Site

Below are the situations should be handled as:


Bent Valves


The most common failure of valves is bending or breaking as a results of contact with the pistons. The valves contacting the highest of a piston is because of incorrect engine synchronization caused by temporal order chain/belt breakage and incorrect fitting of latest belts and chains. If you believe your engine could have bent or broken valves, it's crucial to not conceive to begin the engine as this could lead to a lot of expensive harm being caused to the plate, pistons and cylinder bores.


The bent valves higher than ar a results of a fagged temporal order belt that has broken. Your temporal order belt doesn’t last forever and desires to get replaced in step with the manufacturer’s service tips. substitution your temporal order belt is affordable insurance against expensive engine harm.


Burnt valve


The other common form of valve failure is valve burn, or burnt valves. basically this is often caused by combustion gases escaping between the valve and valve seat after they don't seem to be protection properly. the recent combustion gases square measure forced past the valve that starts to burn away the sting of the valve, increasingly obtaining worse the longer it's left while not being corrected. unremarkably this sort of failure affects the exhaust valves solely, however it also can injury the intake valves.


A burnt valve can cause problems together with your vehicle’s performance and fuel consumption. Rough idle, reduced power, backfiring, and misfire square measure all symptoms of valve burn. If your engine is showing symptoms like these, we have a tendency to advocate you get your automotive checked by a trusty mechanic, as continual driving with a burnt valve can cause a lot of injury to your engine, and can successively price a lot of to repair within the long-term.


Possible causes of burnt valves are:engine valve


Bent-Valves-Caused-By-A-Broken-Timing-Belt-320x200

Bent valves caused by broken temporal order belt


Excessive localized heat

Combustion gases escaping past the valve and targeted at only 1 purpose

Irregular valve protection with plate valve seat. Carbon residues generated by irregular combustion (poor mixture) can seem at the seat region and can jeopardize the protection between the valve and its seat

Deficient refrigeration is another issue, because of partial obstruction of the plate cooling. As a consequence, the valve is cooled inadequately

Incorrect valve clearance will jeopardize the valve protection and conjointly cause this sort of failure

Running a dry fuel like L.P.G leading to inadequate lubrication of the valve seat, inflicting the valve seat to fail and consequently, the valves.


A-Valve-Starting-To-Burn4

A Valve setting out to Burn





×

Contact Us

captcha