Engine Valve Inspection Machine

Workstation 1: Full size inspection workstation (laser measurement + displacement sensor);

Workstation 2: Laser marking;

Unloading station: After the workpiece is inspected, it is sorted at this point through the unloading station. The programmable logic controller (PLC) tracks the workpiece detection data to this workstation and performs cutting and sorting inspection on the workpiece based on the detection results; Prevent product collision and install a full material alarm device. We provide a total of 7 channels (1 qualified, 6 unqualified, and 1 spare material, which can be customized by customers)

-Each workstation has sensors to detect the presence of workpieces to ensure accurate data tracking;

The positioning of the product during testing must not cause harm to the product.

Contact displacement sensor ( Solartron UK):

1. Stem runout, 0.006mm (Cg ≥ 1.33. Measurement accuracy requirement 0.001mm)

2. Seat runout, 0.02mm (Cg ≥ 1.33. Measurement accuracy requirement 0.002mm)

3. Head diameter runout, 0.10mm (Cg ≥ 1.33. Measurement accuracy requirement 0.01mm)

Laser measuring instrument ( Keyence TM-X5040):

1. Head diameter, ± 0.08mm (Cg ≥ 1.33. Measurement accuracy requirement 0.02mm)

2. Stem diameter, ± 0.008mm (Cg ≥ 1.33. Measurement accuracy requirement 0.002mm)

3. Carbon diameter, ± 0.05mm (Cg ≥ 1.33. Measurement accuracy requirement 0.02mm)

4. Profile diameter, ± 0.08mm (Cg ≥ 1.33. Measurement accuracy requirement 0.02mm)

5. Groove to tip end distance, ± 0.08mm (Cg ≥ 1.33. The measurement accuracy requirement is 0.02mm)

6. Groove bottom diameter, ± 0.04mm (Cg ≥ 1.33. Measurement accuracy requirement 0.02mm)

7. Groove Radius, ± 0.02mm (Cg ≥ 1.33. Measurement accuracy requirement 0.002mm)

8. Center distance of three grooves, ± 0.02mm (Cg ≥ 1.33. Measurement accuracy requirement 0.02mm)

9. Distance between head face and the datum, ± 0.08mm (Cg ≥ 1.33. Measurement accuracy requirement 0.008mm)

10. Distance between tip end face and the datum, ± 0.1mm (Cg ≥ 1.33. The measurement accuracy requirement is 0.01mm)

11. Total length, ± 0.1mm (Cg ≥ 1.33. Measurement accuracy requirement 0.01mm)